APC SMT 3000 VA User Manual

990-1704 01/2004 User Manual EnglishAPC SmartAPC SmartAPC SmartAPC Smart----UPSUPSUPSUPS 1500/3000 VA 120/230 Vac1500/3000 VA 120/2

8 4: USER CONFIGURABLE ITEMS NOTE: SETTINGS ARE MADE THROUGH THE SUPPLIED POWERCHUTE SOFTWARE OR THE NETWORK INTERFACE CONNECTION. REFER TO

9 NOTE: SETTINGS ARE MADE THROUGH THE SUPPLIED POWERCHUTE SOFTWARE OR THE NETWORK INTERFACE CONNECTION. REFER TO THE SOFTWARE HELP GUIDES FOR D

10 5: STORAGE, MAINTENANCE, SHIPPING, AND SERVICE Storage Store the UPS covered in a cool, dry location, with the battery fully charged. At -1

11 Shipping 1. Shut down and disconnect any equipment attached to the UPS. 2. Shut down the UPS, and disconnect the UPS from the utility power

12 6: TROUBLESHOOTING Use the chart below to solve minor UPS installation and operation problems. Refer to APC for assis-tance with complex UP

13 PROBLEM AND/OR POSSIBLE CAUSE SOLUTION NOT ALL OUTLETS ARE POWERED One or more of the outlet groups (labeled ‘1’, ‘2’, and ‘3’) are shut off

14 PROBLEM AND/OR POSSIBLE CAUSE SOLUTION THE OVERLOAD LED IS ILLUMINATED AND THE UPS EMITS A SUSTAINED ALARM TONE The UPS is overloaded. The c

15 PROBLEM AND/OR POSSIBLE CAUSE SOLUTION THE BYPASS LED IS ILLUMINATED The UPS has briefly directed power around the power proc-essing module d

16 7: REGULATORY AND WARRANTY INFORMATION 120V models This equipment has been tested and found to comply with the limits fo

17 Limited Warranty American Power Conversion (APC) warrants its products to be free from defects in materials and workmanship for a period of tw

1 Introduction This APC Smart-UPS is a modular Uninterruptible Power Supply (UPS) for high availability applications such as data centers and mis

2 Mount the UPS in the Rack and Connect the Battery Attention: Install the rails following the instructions in the rail kit.      

3 Tower Configuration  Press and hold the black switch (see location designation on UPS) to the right while removing the power processing module

4 2: START UP Connect Equipment to the UPS Rear Panels 1500 VA, 120 V: 1500 VA, 230 V: 3000 VA, 120 V: 3000 VA, 230 V: Note: • The ‘out

5 The battery will charge to full capacity during the first few hours of normal operation. Do not expect full ‘on battery’ capability during this

6 3: BASIC OPERATION Front Display Panel INDICATOR DESCRIPTION Online The UPS is supplying utility power t

7 FEATURE FUNCTION Self-Test Automatic: The UPS performs a self-test automatically when turned on, and every two weeks thereafter (by default).