APC AFX Series Specifications download pdf (Page 9)

Optional Features

APC NetworkAIR™ AFX 5

Floorstand

The floorstand raises the unit above

the subfloor to match the height of

the raised floor. Heights are avail-

able (from 6” (142 mm) to 36” (914

mm)) in 3” (76.2 mm) increments

and are adjustable +/- 1.5” (38.1

mm). APC recommends at least 12”

(305 mm) high floorstands for their

downflow units. Adjustment is pro-

vided by threaded pedestals.

Vibration absorbing pads are

included. The floorstand, pedestal,

and pads ship loose. In areas where

earthquakes are a concern, seismic

floorstands are available in 12”

(305mm), 18” (457 mm) and 24”

(610 mm) heights.

Environmental Management

System

A browser-accessible, 1U, rack-

mountable appliance allows

monitoring of environmental condi-

tions. Monitoring of one

temperature, one humidity, and one

vibration sensor ship standard.

When conditions change, notifica-

tions are sent via email to

appropriate personnel. The EMS

provides 8 input contacts, 2 output

relays, and controllable power out-

lets for defining actions remotely

should conditions warrant it.

ModBus/JBus Gateway

The Gateway translates transmis-

sion protocol from the system’s

network into ModBus/JBus com-

munication protocol. One gateway

can support up to 16 units.

Custom Alarm Contact Closures

Each unit is equipped with dry con-

tact closures. Upon activation of the

associated alarm, a discreet Nor-

mally open or Normally closed

contact is available for remote mon-

itoring of that discrete alarm.

Downflow Return Duct

A return duct the length and width

of the unit may be field installed on

a downflow unit to provide conve-

nient connection to external

ductwork.

Casters

A set of 6” plated rolling caster

wheels are available for handling of

equipment.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 45 46

Comments to this Manuals

No comments