APC AFX Series Technical Information download pdf (Page 7)

Remote Air Cooled Condenser4

Configuration and Integration

Introduction

The included electrical data, piping diagram, system installation information, and operational control

settings are required to properly connect and configure the Outdoor Heat Exchanger (OHE) to operate.

Warning: Failure to follow this information may result in poor performance or damage to air

conditioning products and/or the OHE.

Wiring Diagrams

See the wiring diagrams included with the OHE for proper electrical connection and jumper settings

required for each OHE model to operate properly. These wiring diagrams are also available at the Sales

Tool Portal for Wiring Diagrams on the APC web site at http://salestools.apc.com/.

Electrical Connections

See “Electrical Connections” on page 5, for OHE to NetworkAIR User Interface connection.

Electrical Data

See “Electrical Data” on page 6, for power requirements.

Piping Diagrams

See “Piping Diagrams” on page 7, for recommended piping and valve locations connecting the OHE to

the NetworkAIR equipment.

Flooded Receiver

See “System Installation” on page 8, for proper installation of the Flooded Receiver.

System Installation

See “Plumbing” on page 9, for piping sizes, piping insulation, and system charges.

Operational Temperature Controls

See “Temperature Controls” on page 13, for the correct settings used with NetworkAIR products.

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

No comments

APC AFX Series Technical Information Page 7