APC Automatic TransferSwitch Owner's Manual

Browse online or download Owner's Manual for Network switches APC Automatic TransferSwitch. APC Automatic TransferSwitch Owner`s manual User Manual

  • Download
  • Add to my manuals
  • Print

Summary of Contents

Page 1 - Redundant Switch

®APCRedundant Switch Installation and Operation Manual www.APCturkey.com

Page 2 - Pre-Installation Procedures

InstallationConnect and route the cables1. To the front of the Redundant Switch, connect the communications cable and any accessory cables that requir

Page 3 - Available Models

InstallationMount the Redundant Switch in the rack1. Slide the front rail segments attached to the Redundant Switch into the rear rail segments attach

Page 4 - SU042-4” on page 5

InstallationTurn on the equipment and Redundant Switch1. Turn on all connected equipment.2. To provide power to the equipment, press the ON button of

Page 5 - SU042-1

ConfigurationSupported configurationsTwo supported configurations for Redundant Switch are shown below. For more information on these and other suppor

Page 6

Configurationb. Restart the computer on which PowerChute plus is installed.c. Start PowerChute plus. Communication is to UPS-A.d. Configure UPS-A acco

Page 7 - Redundant

OperationControls, LEDs, and ports on the front panelStorageNoteAPC recommends the factory default settings among the settings shown below.Function LE

Page 8 - (4-post rack

OperationEmergency Power OffYou can use a remotely operated Emergency Power Off (EPO) switch to turn off the UPS and disconnect power to the equipment

Page 9

OperationFront panel programmable settingsThe following programmable settings are accessible using controls located on the Redundant Switch front pane

Page 10 - Connect and

TroubleshootingBasic troubleshootingFor computer interface port specifications, see the APC Web ElectricalHazardOnly trained APC technicians should op

Page 11

TroubleshootingTroubleshooting communications and lost redundancyWith the high availability system, the attached UPSs are polled continuously for capa

Page 12

Pre-Installation ProceduresReceiving inspectionInspect the package and contents for shipping damage, and make sure that all parts were sent. Report an

Page 13 - Configuration

SpecificationsSU041, SU042-1, SU042-2, and SU042-4Item SpecificationPowerNominal input voltage120VACInput voltage range0 – 165 VA CFrequency range47 –

Page 14 - When one

SpecificationsSU043 and SU044-1Item SpecificationPowerNominal input voltage230VACInput voltage range0 – 325 VA CFrequency range47 – 63 HzNormal sensit

Page 15 - Operation

SpecificationsSU045Item SpecificationPowerNominal input voltage208VACInput voltage range0 – 275 VA CFrequency range47 – 63 HzNormal sensitivity transf

Page 16 - Electrical

Appendix A: Rack-Mount SupplementInstallation for rack-mount unitsThe Redundant Switch is provided with brackets for mounting in standard 19 in.(46.5

Page 17 - LED Display Status of Source

Appendix A: Rack-Mount SupplementRail hardware Different types of racks require different rail hardware.The following APC clip nuts and cage nuts, men

Page 18 - Troubleshooting

Warranty and ServiceLimited warrantyAPC warrants the Redundant Switch to be free from defects in materials and workmanship for a period of two years f

Page 19

Warranty and Servicereplacement.4. Pack the unit carefully. The warranty does not cover damage sustained in transit. Enclose a letter with your name,

Page 20 - Specifications

Radio Frequency InterferenceThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of th

Page 21 - Item Specification

Available ModelsFollowing is a rear view and basic information for each available Redundant Switch model.Model SU041Model SU042-1For information on th

Page 22

Available ModelsModel SU042-4For information on the circuit breaker safety device and load indicator for this model, see “Features of models SU042-1 a

Page 23 - Installation for

Available ModelsModel SU045-1Features of models SU042-1 and SU042-4Safety device. Models SU042-1 and SU042-4 have a red circuit breaker safety device

Page 24

InstallationInstall management products and the UPS1. Before you plug in the Redundant Switch and the two UPSs, install any compatible APC management

Page 25 - Warranty and Service

InstallationAttach the brackets to the Redundant SwitchAttach the two included brackets to the Redundant Switch. The following example shows how to at

Page 26

InstallationInstall the rails (4-post rack only)Mount the rails only if you are using a four-post rack. (In a two-post rack, you mount the Redundant S

Page 27 - Radio Frequency Interference

Installation4. On each side, attach the front rail segment that you set aside in step 2 to the Redundant Switch.a. Align the top two holes on the fron

Comments to this Manuals

No comments