✔
✔
990-1185 5/02 Copyright © 2002 American Power Conversion All rights reserved.
APC, PowerChute plus Personal Edition, and Back-UPS are registered trademarks of American Power Conversion.
All other trademarks of the property of their respective owners.
BR24BP Battery Pack
User’s Manual
Back-UPS
®
RS/XS 1500
1
®
CONTENTS
w
w
w
.apc.com
®
for use with
2
OPERATING ENVIRONMENT
32 - 104
o
F (0 - 40
o
C)
3
REMOVE BACK-UPS FROM
SINGLE-UNIT PEDESTAL
5
INSTALL PEDESTAL EXTENDER
Align
A
Slide Together
B
4
DISASSEMBLE SINGLE-UNIT PEDESTAL
Press Down Here
Slide Apart
A
B
6
INSTALL BACK-UPS AND
BATTERY PACK IN PEDESTAL
7
CONNECT BACK-UPS TO
BATTERY PACK
Data Port
Buildi ng
Wiring Fault
Wall
Outlet
Modem/
Phone/Fax
TVSS GND
Wa ll
Outlet
10/100 Base-T
VOIP
BR24 BP Battery Pack
SPECIFICATIONS
Item Specification
Battery Voltage 24 Vdc (nominal)
Typical Recharge Time 24 Hours (UPS and Battery
Pack)
Operating Temperature
32
o
to 104
o
F
(0
o
to 40
o
C)
Storage Temperature
23
o
to 113
o
F
-5
o
to 45
o
C
Operating / Storage
Relative Humidity
0 to 95% non-condensing
Size (H x W x D) 14.6 x 3.4 x 13.1 inch
37.1 x 8.6 x 33.3 cm
Weight 27.5 lbs (12.5 kg)
Shipping Weight 29.5 lbs (14 kg)
SERVICE
If the Battery Pack arrived damaged, notify the carrier.
If the Battery Pack requires service, do not return it to the dealer. The fol-
lowing steps should be taken:
1. Consult the Back-UPS Troubleshooting section to eliminate common
problems.
2. If the problem persists, go to http://www.apc.com/support/.
3. If the problem still persists, contact APC Technical Support:
• When contacting APC Technical Support, have the Back-UPS and
Battery Pack model number, serial number and date of purchase
available. Be prepared to troubleshoot the problem over the phone with
an APC Technical Support representative. If this is not successful, APC
will issue a Return Merchandise Authorization (RMA) number and a
shipping address.
LIMITED WARRANTY
The standard warranty is two (2) years from the date of purchase. APC’s
standard procedure is to replace the original unit with a factory reconditioned
unit. Customers who must have the original unit back due to the assignment of
asset tags and set depreciation schedules must declare such a need at first
contact with an APC Technical Support representative. APC will ship the
replacement unit once the defective unit has been received by the repair
department, or cross-ship upon the receipt of a valid credit card number. The
customer pays for shipping the unit to APC. APC pays ground freight
transportation costs to ship the replacement unit to the customer.
CONTACT INFORMATION
Technical Support http://www.apc.com/support
Internet http://www.apc.com
USA / Canada 1.800.800.4272
Mexico 292.0253 / 292.0255
Brazil 0800.12.72.1
Worldwide +1.401.789.5735
✔
(23 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals