APC AP9830 User Manual download pdf (Page 2)

Protection

Sine-wave Output provides assurance of compat-

ibility with all types of loads.

Lightning and Surge Protection Integrated

Surge Suppression is superior to separate surge

suppressors.

Network-grade Line Conditioning provides full

time EMI/RFI filtering, thus preventing data errors

caused by line noise.

Emergency Power Off (EPO) Smart-UPS RT can

be attached to central EPO system for shutdown in an

emergency situation.

Unattended Safe & Graceful Shutdown

prevents possible data corruption by providing

systematic, unattended operating system shutdown in

the event of an extended power outage.

Alarms and Indicators provide operational

status information of the UPS instantaneously.

Availability

Zero Transfer Timeensures no interruption of

mission-critical applications when UPS transfers

to/from the batteries.

Wide Input Voltage Range 160-280 VAC input

voltage range at full load allows less time on battery

while preserving battery capacity for blackout condi-

tions. Input voltage can go as low as 100 VAC, at half

load, without using the battery.

Continuous Voltage and Frequency Regulation

Smart-UPS

RT provides premium, regulated sine-

wave power for sensitive equipment. Smart-UPS RT

is also generator-set compatible.

Built-in Automatic & Manual Bypass ensures

continuous supply of power to the critical loads in the

event of electronic failure, overload condition, or

scheduled maintenance.

Scalable Runtime Unlimited number of matching

battery packs can be added to increase runtime to

desired levels.

Faster Recharge Time ensures battery

power is available more quickly for subsequent

power disturbances.

Cold Start allows the unit to be powered without

input power being available.

Intelligent Battery Management utilizes micro-

processor to control battery charging and diagnostic

testing ensuring maximum battery life.

Hot-Swappable, User Replaceable Batteries

allow continuous operation of the load when batter-

ies are being replaced by the end user.

Economy

Input Power Factor Correction increases

safety and compliance with regional wiring/

electrical standards. Also reduces the utility power

and wiring costs.

Replace Battery lights and alarm sounds when

the UPS battery is nearly dead and must be

replaced (typically within 30 days).

Battery Charge/Line Voltage displays both

present battery charge as a percentage of battery

capacity and utility line voltage. Alarm sounds upon

low battery condition.

Off Button turns off the UPS and the load and is

designed to prevent accidental shutdowns.

On/test button turns on the UPS and activates the

UPS self-test and utility line voltage displays.

Load Display shows the power being drawn

by the load so you can avoid exceeding capacity

On-line LED lights when the UPS is drawing

utility power and performing double conversion

to supply clean power.

On-Battery LED lights and alarm sounds when

the UPS is supplying battery power to the load.

Bypass LED lights when unit is operating in

bypass mode.

Overload LED lights and alarm sounds when

the load connected to the UPS exceeds capacity.

Fault LED lights when unit is experiencing an

internal fault.

Display can be rotated 90° for correct orientation as unit is

shifted from tower to rack configuration.

Adaptability

Rack/Tower Convertiblegives Smart-UPS RT a

flexible form factor enabling integration into a wide

variety of end-user environments.

1:1 and 3:1 Combined in a Single Product

allows the same product to be wired to a single-

phase or a three-phase input. This feature is avail-

able in Smart-UPS RT 7500/10000 VA models only.

Multiple Output Voltages 230 VAC nominal out-

put voltage can be programmed for 220 or 240 VAC

operation.

Auto-sensing and Programmable

Frequency

automatically provides 50 or 60 Hz. The

end user can also set output frequency to desired

tolerance levels.

Flash Programmable Firmware makes the UPS

field-upgradeable.

Terminal Mode Programmabilityis a

menu-driven interface that allows quick and easy

configuration of the UPS. Ideal for users not using

PowerChute

software or a management card.

Built-in SmartSlot houses APC’s accessory cards,

which increase overall system manageability through

timely notification of hazardous conditions.

INFORMATIVE LED DISPLAY PROVIDES STATUS AT A GLANCE

APC accessory cards can be inserted into the built-in

SmartSlot to allow monitoring of power conditions.

The Smart-UPS RT 5000, 7500, and 10,000 units ship bun-

dled with the Web/SNMP Management Card

Redundancy

Automatic Transfer Switch Application pro-

vides redundant power to single-corded equipment.

PowerChute

Network Shutdown Software

allows for simultaneous management of two UPSs.

Supports multiple servers as well as 2N configura-

tions. Servers with one primary and one redundant

power supply can be plugged into separate UPSs.

Features and Benefits

3000VA Automatic

Transfer Switch

User-friendly, hot-swappable battery replacement

For more information about APC products go to www.apc.com

1 2 3 4

Comments to this Manuals

No comments

APC AP9830 User Manual Page 2

Comments to this Manuals

Related products and manuals for Remote starters APC AP9830