APC MGE Galaxy 300 User's Guide download pdf (Page 10)

Network Management Card User’s Guide1

Introduction

Product Description

Features

The American Power Conversion Network Management Card (AP9635) is a Web-based product that

manages supported devices using multiple, open standards such as Hypertext Transfer Protocol (HTTP),

Telnet, Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS), Secure SHell (SSH), Simple

Network Management Protocol (SNMP), File Transfer Protocol (FTP), and Secure CoPy (SCP). The

Network Management Card:

• Provides data and event logs

• Provides support for the PowerChute

Network Shutdown utility

• Supports using a Dynamic Host Configuration Protocol (DHCP) or BOOTstrap Protocol

(BOOTP) server to provide the network (TCP/IP) values of the Management Card

• Supports using the Remote Monitoring Service (RMS)

• Supports remote monitoring over modem using Tele Service Connect (TLS) (MGE

Galaxy

300

and MGE Galaxy 7000 only). Contact APC Support for information.

• Enables you to configure notification through event logging (by the Management Card and

Syslog), e-mail, and SNMP traps. You can configure notification for single events or groups of

events, based on the severity level or category of events

• Provides the ability to export a user configuration (.ini) file from a configured card to one or more

unconfigured cards without converting the file to a binary file

• Provides a selection of security protocols for authentication and encryption

• Communicates with InfraStruxure

Central

• Supports Modbus RTU over a serial RS485 port

• Supports Modbus over TCP (Symmetra

PX 250 and 500 only)

Devices in which you can install the Management Card. The AP9635 Network Management Card

can be installed into the Symmetra PX 250, Symmetra PX 500, MGE Galaxy 300, and MGE Galaxy

7000 UPS devices.

Note: The Network Management Card ships with the firmware for the MGE Galaxy 300 and

MGE Galaxy 7000 already installed. If you are ordering the card as a replacement part for a

Symmetra PX 250 or Symmetra PX 500, you will need to install the Symmetra-specific

firmware. Contact APC Worldwide Customer Support for more information. See “APC

Worldwide Customer Support” on page 96.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 104 105

No comments

APC MGE Galaxy 300 User's Guide Page 10