APC MGE Galaxy 300 User's Guide download pdf (Page 36)

Network Management Card User’s Guide27

web

Access: Administrator

Description: Enable access to the Web interface using HTTP or HTTPS.

For additional security, you can change the port setting for HTTP and HTTPS to any unused port from

5000 to 32768.

Example: To prevent all access to the Web interface, type:

web -S disable

xferINI

Access: Administrator only

Description: Use XMODEM to upload an .ini file while you are accessing the command line interface

through a serial connection. After the upload completes:

• If there are any system or network changes, the command line interface restarts, and you must log

in again.

• If you selected a baud rate for the file transfer that is not the same as the default baud rate for the

the Management Card, you must reset the baud rate to the default to reestablish communication

with the Management Card.

xferStatus

Access: Administrator only

Description: View the result of the last file transfer.

See “Use a USB drive to transfer the files” on page 87 for descriptions of the transfer result

codes.

Option Argument Definition

-S disable | http | https Configure access to the Web interface. When HTTPS is enabled, data is

encrypted during transmission and authenticated by digital certificate.

-ph <http port #> Define the TCP/IP port used by HTTP to communicate with the

Management Card (80 by default).

-ps <https port #> Define the TCP/IP port used by HTTPS to communicate with the

Management Card (443 by default).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 104 105

No comments

APC MGE Galaxy 300 User's Guide Page 36