APC MGE Galaxy 300 User's Guide download pdf (Page 53)

44Network Management Card User’s Guide

Note: Events are processed through the filter using OR logic.

• Events that you do not select from the Filter By Severity list never display in the filtered

event log, even if the event occurs in a category you selected from the Filter by Category

list.

• Events that you do not select from the Filter by Category list never display in the filtered

event log, even if devices in the category enter an alarm state you selected from the Filter by

Severity list.

To delete the log (Logs > Events > log):

To delete all events recorded in the log, click Clear Log on the Web page that displays the log. Deleted

events cannot be retrieved.

To disable the logging of events based on their assigned severity level or their event category,

see “Configuring by group” on page 66.

To configure reverse lookup (Logs > Events > reverse lookup):

Reverse lookup is disabled by default. Enable this feature unless you have no DNS server configured or

have poor network performance because of heavy network traffic.

With reverse lookup enabled, when a network-related event occurs, both the IP address and the domain

name for the networked device associated with the event are logged in the event log. If no domain name

entry exists for the device, only its IP address is logged with the event. Since domain names generally

change less frequently than IP addresses, enabling reverse lookup can improve the ability to identify

addresses of networked devices that are causing events.

To resize the event log (Logs > Events > size):

By default, the event log stores 400 events. You can change the number of events the log stores. When

you resize the event log, all existing log entries are deleted. To avoid losing log data, use FTP or SCP to

retrieve the log before you enter a new value in the Event Log Size field.

See “How to use FTP or SCP to retrieve log files” on page 47.

When the log is full, the older entries are deleted.

Data log

Path: Logs > Data > options

View a log of measurements about the UPS, the power input to the UPS, and the ambient temperature of

the UPS and batteries. Each entry is listed by the date and time the data was recorded.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 104 105

No comments

APC MGE Galaxy 300 User's Guide Page 53