APC MGE Galaxy 300 User's Guide download pdf (Page 83)

74Network Management Card User’s Guide

Event Log, Temperature Units, and Log-In Page

Path: Administration > General > Preferences

Color-code event log text

This option is disabled by default. Select the Event Log Color Coding check box to enable color-coding

of alarm text recorded in the event log. System-event entries and configuration-change entries do not

change color.

Change the default temperature scale

Select the temperature scale (Fahrenheit or Celsius) in which to display all temperature measurements in

this user interface.

Specify the UI language

You can specify the default language for the user interface with the Language field. This can be set

when you log on also. From the drop-down box, select one of the languages displayed.

Note: You can also specify different languages for e-mail recipients and SNMP trap

receivers. See “E-mail recipients” on page 75 and “Trap Receivers” on page 76.

Specify a default login page

Configure the Web page that will display by default when any user logs in.

Text Color Alarm Severity

Red Critical: A critical alarm exists, which requires immediate action.

Orange Warning: An alarm condition requires attention and could jeopardize your data or equipment if

its cause is not addressed.

Green Alarm Cleared: The conditions that caused the alarm have improved.

Black Normal: No alarms are present. The Network Management Card and all connected devices are

operating normally.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 104 105

No comments

APC MGE Galaxy 300 User's Guide Page 83