APC BMG3-A Datasheet download pdf

Brick Replacement

RECAUTIONS

ANGER

AZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

· A

pply appropriate personal protective equipment (PPE) and follow safe electrical work

practices. See NFPA 70E.

· This equipment must only be installed and serviced by qualified electrical personnel.

· Turn off all power supplying this equipment before working on or inside equipment.

· Always use a properly rated voltage sensing device to confirm power is off.

· Replace all devices, doors and covers before turning on power to this equipment.

Failure to follow these instructions will result in death or serious injury.

Surge Protective Devices (SPD)

Retain for future use

For technical support, go to www.apc.com/support/contact

WARRANTY

For warranty information about your Surge Protection Device, go to the APC

Choose your part number from among the three categories listed under

Hardwire Surge Suppression. A screen containing information specific to

tab to locate the file containing your warranty.

Web site: www.apc.com. Choose Products, and then choose Surge Protection

and Power Conditioning. Scroll down to Hardwire Surge Suppression.

your Surge Protection Device is then displayed. Click on the Documentation

INSTALLATION

Verify that all brick replacement modules have the correct catalog number. The catalog number

is found on the nameplate of each brick replacement module (see Figure 1) and on the SPD

device nameplate. Use Table 1 to determine the correct replacement catalog number based on

the existing SPD system voltage and peak surge current rating.

SYSTEM

VOLTAGE

PEAK SURGE

CURRENT

RATING

PRODUCT

NUMBER

120/240V, 1 phase, 3 wire Wye

120 kA

BMP3-A

120/208V, 3 phase, 4 wire Wye

220/380V, 3 phase, 4 wire Wye

277/480V, 3 phase, 4 wire Wye

347/600V, 3 phase, 4 wire Wye

BMF3-A

BMH3-A

BMG3-A

BML3-A

120 kA

Table 1: Brick Module Replacements

Table 2: Installation Torque

Power Connection Terminal Torque

W/O Disconnect W/ Disconnect

AØ, BØ, CØ & N 35 lb-in (4N·M) 50 lb-in (5.7N·M)

Ground 50 lb-in (5.7N·M)

1 2

Brick Replacement 1
INSTRUCTIONS 2

Summary of Contents

Page 1 - Brick Replacement

Brick ReplacementPRECAUTIONS DANGERHAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH· Apply appropriate personal protective equipment (PPE) and follo

Page 2 - INSTRUCTIONS

2APC REPLACEMENT BRICK PRODUCTS Surge Protective Device (SPD)INSTRUCTIONS9/08990-3490 (8251-0138A)1. Turn off all power to the SPDR Brick.2. Mark th

Comments to this Manuals

No comments

APC BMG3-A Datasheet

Browse online or download Datasheet for Surge protectors APC BMG3-A. APC BMP3-A surge protector User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Surge protectors APC BMG3-A