APC BX950U-GR User's Guide download pdf

Operational Features

Install PowerChute

™

Software

To install PowerChute Personal Edition (PCPE) software, connect a USB cable to the data port on the UPS and

the other end to a computer with access to the web.

On the computer, go to www.apc.com/tools/download. Select “Software Upgrades - PowerChute Personal

Edition” in the “Filter by Software/Firmware” drop down menu. Select the appropriate operating system.

Follow directions to download the software.

Automatic Voltage Regulation

Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds safe levels. This allows the

equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in

the event of a power cut.

The Back-UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic

Voltage Regulation to compensate, or if the AC power is distorted.

If the Back-UPS switches to battery power too frequently or too infrequently, adjust the transfer voltage and

sensitivity settings:

1 . Ensure the Back-UPS is off. Plug it into AC power.

2 . Press and hold the ON/OFF button until the LED repeatedly flashes. The unit is now in Program Mode.

3 . Release the button. The LED will indicate the current setting by flashing once, twice, or three times per

second, and emitting audible beeps.

4 . If the button is not pressed within five seconds, the Back-UPS will exit the Program Mode.

No-load Shutdown

If the UPS is operating on battery power and detects that the connected equipment is using less than 15 W of

energy for more than 15 minutes, it will shut down to conserve energy.

When the UPS is reconnected to AC power, the UPS will automatically switch on.

LED

Flashes

Audible

Indicator

Volt age

Sensitivity

Setting

Input

Voltage

Range

No-load

Shutdown Description

Green None Low 150-280 Disabled Use this setting with equipment that is

less sensitive to fluctuations in voltage or

waveform distortions.

Green 4 beeps per

second

Low 150-280 Enabled Use this setting with equipment that is

less sensitive to fluctuations in voltage or

waveform distortions.

Red None Medium 155-280 Disabled Use this setting for normal operation

conditions.

Red 4 beeps per

second

Medium

(factory

default)

155-280 Enabled Use this setting for normal operation

conditions.

Green and

Red

None High 160-280 Disabled Use this setting when connected

equipment is sensitive to voltage

fluctuations or waveform distortions.

Green and

Red

4 beeps per

second

High 160-280 Enabled Use this setting when connected

equipment is sensitive to voltage

fluctuations or waveform distortions.



Online LED



Circuit breaker



Battery LED



Battery Backup + Surge

Protection outlets See outlet type



On/Off button and quantity breakdown for each

model from the table on the left.



Battery connector



AC power inlet



Telephone/Network

port



USB port

Model

Outlet Type

and Quantity

BX950U-AZ/

BX1400U-AZ

x 6

BX950U-FR/

BX1400U-FR

x 4

BX950U-GR/

BX1400U-GR

x 4

BX950U-MS/

BX1400U-MS

x 4

x 2

BX950UI/

BX1400UI

x 6

bu043i

bu388g

Back-UPS

BX950U-GR/BX1400U-GR

Safety and General Information

Inspect the package contents upon receipt. Notify the

carrier and dealer if there is any damage.

Read the following reminders before installing the UPS.

User Guide

Status Indicators

• This UPS is intended for indoor use only.

• Connect the UPS power cable directly to a wall outlet. Do not use surge protectors or extension cords.

• When grounding cannot be verified, disconnect the equipment from the AC power outlet before

installing or connecting to other equipment. Reconnect the power cord after all connections are made.

• Servicing of batteries should be performed by Schneider Electric IT (SEIT) Customer Support only.

• When replacing battery the UPS must be OFF, and its AC inlet unplugged.

• Do not dispose of batteries in a fire. The batteries may explode.

• Do not open or mutilate batteries. They contain an electrolyte that is toxic and harmful to the skin

and eyes.

• To avoid harmful injury due to energy hazard, remove wrist watches and jewelry such as rings

when replacing the batteries. Use tools with insulated handles.

• Replace batteries with the same number and type of batteries as originally installed in the

equipment.

Status LED Indicator Audible Alarm

Audible Alarm

Terminates

Power On

The Back-UPS is supplying AC

power to connected equipment.

The On Line LED

illuminates green.

None N/A

On Battery

The Back-UPS is supplying

battery power to battery backup

outlets.

The On Line LED

illuminates green.

The LED is not

illuminated during the

beeps.

Back-UPS beeps 4

times every 30

seconds.

The beeping stops when

AC power is restored or

the

Back-UPS is turned off.

Low Battery warning

The Back-UPS is supplying

battery power to the battery

backup outlets and the battery is

near a total discharge state.

The On Line LED flashes

green.

The Back-UPS

emits rapid

beeping. (once

every second)

The beeping stops when

AC power is restored or

the

Back-UPS is turned off.

Replace Battery

The battery is disconnected.

The battery needs to be charged

or replaced.

•The Battery LED

flashes red.

• Battery and On Line

LEDs flash alternately.

Constant tone The Back-UPS is turned

off.

Overload Shutdown

While operating on battery

power an overload condition has

occurred in one or more of the

battery backup outlets.

None Constant tone The Back-UPS is turned

off.

Sleep Mode

While operating on battery

power the battery is completely

discharged.

The Back-UPS will awaken once

AC power is restored.

None The Back-UPS

beeps once every

four seconds.

• AC power is restored

• AC power is not

restored within 32

seconds

• The Back-UPS is

turned off

Overload Alarm

The equipment connected to the

Back-UPS is drawing more

power than the voltage rating

allows.

The Battery LED

illuminates red.

Constant tone Alarm stops when

nonessential equipment is

disconnected from the

Battery Backup outlets.

Connect the Battery

™

1 Connect the battery by pulling the battery connector handle

down, and then pushing it into the unit.

2 Connect the Back-UPS BX950U-GR/BX1400U-GR power

cable directly to a wall outlet. Do not use surge protectors or

extension cords.

3 Press the ON/OFF button to turn on the unit.

The green “Power On” indicator confirms that the Back-UPS is on and ready to provide

protection.

The Back-UPS should charge for at least 10 hours to ensure sufficient runtime. The unit is being

charged whenever it is connected to AC power, whether the unit is turned ON or OFF.

Features

Troubleshooting and Service

1 . If the problem persists, contact Schneider Electric IT (SEIT) Customer Support through the Schneider

Electric web site, www.apc.com.

a. Note the model number and serial number and the date of purchase. The model and serial numbers are

located on the rear panel of the unit and are available through the LCD display on select models.

b. Call SEIT Customer Support and a technician will attempt to solve the problem over the phone. If this is

not possible, the technician will issue a Returned Material Authorization Number (RMA#).

c. If the unit is under warranty, the repairs are free.

d. Service procedures and returns may vary internationally. Refer to the Schneider Electric web site for

country specific instructions.

2 . Prepare to troubleshoot the problem over the phone. If this is not successful, and the unit is still under

warranty, the Technical Support Representative will provide all necessary information to return the unit for

replacement

Warranty

The standard warranty is two (2) years from the date of purchase. SEIT standard procedure is to replace the

original unit with a factory reconditioned unit. Customers who must have the original unit back due to the

assignment of asset tags and set depreciation schedules must declare such a need at first contact with an SEIT

Technical Support representative. SEIT will ship the replacement unit once the defective unit has been received

by the repair department, or cross-ship upon the receipt of a valid credit card number. The customer pays for

shipping the unit to SEIT. SEIT pays ground freight transportation costs to ship the replacement unit to the

customer.

APC by Schneider Electric IT Customer

Support Worldwide

For country specific customer support, go to the APC by Schneider Electric web site, www.apc.com.

Specification BX950U-GR BX1400U-GR

Input

Voltage 230 Vac, nominal

Frequency 50/60 Hz ± 3Hz auto-sensing

Brownout Transfer 155 Vac, typical

Over-voltage Transfer 280 Vac, typical

Output

UPS Capacity (total)

950 VA / 480 W

1400 VA / 700 W

Voltage On Battery 230 Vac rms (step-approximated sinewave)

Frequency on Battery 50/60 Hz ± 1Hz

Transfer Time 8 ms typical

Protection

and

Filtering

AC Surge Protection Full time, 273 Joules

AC Input Resettable circuit breaker

Battery

Type (maintenance free,

lead acid)

9 Ah, 12 V x 1 7.2 Ah, 24 V (12 Vx2)

Average Life

The battery typically lasts for two to five years.

Environmental factors impact battery life. Elevated

temperatures, high humidity, poor quality mains power,

and frequent, short duration discharges will shorten

battery life.

The battery in the Back-UPS BX950U-GR/

BX1400U-GR is not user-replaceable. Contact SEIT

Technical Support for a list of authorized service

centers near you.

Typical Recharge Time 8 Hours

Physical

Net Weight

8 kg

12 kg

Dimensions (H x W x D) 21.5 cm x 13 cm x 33.6 cm

Specifications

EN 990-5388 08/2014

Industries S.A.S. or their affiliated companies. All other trademarks are property of their respective owners.

Back-UPS 1
BX950U-GR/BX1400U-GR 1

Summary of Contents

Page 1 - BX950U-GR/BX1400U-GR

5Operational FeaturesInstall PowerChute™ SoftwareTo install PowerChute Personal Edition (PCPE) software, connect a USB cable to the data port on the U

Comments to this Manuals

No comments

APC BX950U-GR User's Guide

Browse online or download User's Guide for Uninterruptible power supplies (UPSs) APC BX950U-GR. APC BX950U-GR uninterruptible power supply (UPS) User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) APC BX950U-GR