Installation and OperationSmart-UPS™ RTUniterruptible Power SupplySURTD3000/5000 XL200-240 VACTower/Rack-Mount 3U
8 Feature Function Cold Start When there is no utility power and the UPS is off, press and hold the button to power up the UPS and connected equip
9 USER CONFIGURABLE ITEMS NOTE: SETTINGS ARE MADE THROUGH SUPPLIED POWERCHUTE SOFTWARE, OPTIONAL SMART SLOT ACCESSORY CARDS, OR
10 NOTE: SETTINGS ARE MADE THROUGH SUPPLIED POWERCHUTE SOFTWARE, OPTIONAL SMART SLOT ACCESSORY CARDS, OR TERMINAL MODE. FUNCTION FA
11 CONNECTING THE EPO (EMERGENCY POWER OFF) OPTION The output power can be disabled in an emergency by closing a switch connected to the EPO. Adh
12 TERMINAL MODE TO CONFIGURE UPS PARAMETERS 3000 VA models: Terminal Mode is a menu driven interface that enables configuration of the UPS by user
13 5000 VA models: Terminal Mode is a menu driven interface that enables configuration of the UPS by users not using PowerChute software or the
14 • Press 2 and ENTER to change the Battery Settings. • Type in the number of external battery packs (four battery modules per pack), and press E
15 MAINTENANCE AND TRANSPORT Replacing the Battery Module This UPS has an easy to replace, hot-swappable battery module. Replacement is a safe pr
16 REPLACING BATTERY MODULES X Y Z [ \ ] ^ _ Disconnecting the Battery for Transport Always DISCONNECT THE BATTERY(s) before shipping in
17 TROUBLESHOOTING, SERVICE, AND WARRANTY INFORMATION Use the table below to solve minor installation and operation problems. Refer to the APC We
This manual and the safety guide are available in English on the enclosed CD and the APC Web site, www.apc.com.您可以从随附的 CD 与 APC 网站 (www.apc.com)上获得本手册
18 PROBLEM AND POSSIBLE CAUSE SOLUTION BYPASS LED ILLUMINATES The bypass switch has been turned on manually or through an accessory. If bypass is t
19 Service If the UPS requires service do not return it to the dealer. Follow these steps: 1. Review the problems discussed in the Troubleshooti
20 RADIO FREQUENCY WARNINGS This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of
1 Smart-UPSTM RT Uninterruptible Power Supply SURTD 3000/5000 VA 200-240 VAC Tower/Rack-Mount 3U English 2010 APC by Schneider Elec
2 Introduction The APCTM by Schneider Electric Smart-UPSTM RT is a high-performance, uninterruptible power supply (UPS) that provides protection fo
3 Wiring and Connecting the UPS 5000 VA XLI MODELS ONLY: HARDWIRING INSTRUCTIONS • Wiring must be performed by a qualified electrician. • Inst
4 CONNECTING THE BATTERY MODULES AND ATTACHING THE FRONT BEZEL
5 BASIC CONNECTORS serial com The serial connector is to be used for interfacing with APC PowerChute software and terminal emulation software. U
6 CONNECTING EQUIPMENT AND POWER TO THE UPS 1. Connect equipment to the UPS (cables not included for XLJ/XLT/XLTW models). 2. Avoid using extensi
7 OPERATION Load SMART-UPS RT FRONT DISPLAY Battery Charge Indicator Description Online The Online LED illuminates when the UPS is drawing u
Comments to this Manuals