APC ACRD200 Installation Manual download pdf (Page 36)

InRow RD Fluid Cooled Operation and Maintenance28

APC Device IP Configuration Wizard

You can use the APC Device IP Configuration Wizard at a computer running Windows 2000, Windows

Server 2003, or Windows XP to configure a Network Management Card.

Note: Most software firewalls must be temporarily disabled for the Wizard to discover

unconfigured Network Management Cards.

To configure one or more Network Management Cards from a user configuration file, see the

User’s Guide on the Utility CD.

1. Insert the Utility CD into a computer on your network.

2. If autorun is enabled, the user interface of the CD starts when you insert the CD. If autorun is not

enabled, open the file contents.htm on the CD.

3. Select the Device IP Configuration Wizard from the main menu.

4. When the Wizard discovers the unconfigured Network Management Card, follow the on-screen

instructions.

Note: If you leave the Start a Web browser when finished option enabled, you can

use apc for both the user name and password to access the cooling unit through your

browser.

.ini file utility

You can use the .ini file export utility to export .ini file settings from configured Network Management

Cards to one or more unconfigured Network Management Cards. The utility and documentation are

included on the Utility CD.

BOOTP & DHCP configuration

The default TCP/IP configuration setting, BOOTP & DHCP, assumes that a properly configured

BOOTP or DHCP server is available to provide TCP/IP settings to Network Management Cards. The

Network Management Card first attempts to discover a properly configured BOOTP server, and then a

DHCP server. It repeats this pattern until it discovers a BOOTP or DHCP server.

If neither of these servers is available, see “Local access to the control console” on page 30, or

“Remote access to the control console” on page 31 to configure the needed TCP/IP settings

A user configuration (.ini) file can function as a BOOTP or DHCP boot file. For more

information, see the TCP/IP configuration section of the Network InRow RD User’s Guide,

available from the Utility CD or the APC Web site, www.apc.com.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

No comments

APC ACRD200 Installation Manual Page 36