APC Condenser 2 Fan Installation Manual download pdf (Page 23)

15InRow RD 10 kW Air Cooled Operation and Maintenance

Using the Path statement

Select the main- and sub-menu options specified in the path statement to view or configure a setting. The

path statement lists the main- and sub-menu items you select to navigate to the item to view or modify.

The parts of the path statement are defined below:

Path: Main > Set Password > Change Passwords

Main >

Your starting point is the main menu.

Set Password > Scroll to and select this option from the main menu.

Change Passwords > Scroll to and select this option from the sub-menu.

Subsequent options are listed and defined under the path statement.

Password entry

The cooling unit has two levels of password protection:

• Device password allows Device Users to change basic and environmental settings.

• Admin password allows all privileges granted for Device Users, and also allows the

Administrator to modify settings that control the components in the cooling unit or change

advanced options.

When you try to change a setting, the display interface prompts you to enter your Admin password. The

default value for both the Device and Admin password is apc (lowercase). To enter your password, use

the up or down arrow key to scroll through the available character set. Press the

ENTER key to select the

current character and move the cursor to the next character position. After selecting the last character of

your password, press the

ENTER key once more to submit your password.

Once the password is entered, it remains in effect until the period of inactivity exceeds the Password

Timeout setting.

See “Timeout” on page 23.

Note: Passwords are case-sensitive.

Start the cooling unit

Path: Main >On/Standby

To start the cooling unit, change the setting to On by pressing the ENTER key to toggle from Standby to

On. The fans will start.

The cooling unit will run according to the configured settings.

Note: On/Standby only affects the local cooling unit. You must set the On/Standby option

for each cooling unit in the cooling group.

Note: To toggle between On and Standby from the scrolling status screens, press the

ENTER

key three times in rapid succession.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

No comments

APC Condenser 2 Fan Installation Manual Page 23