APC AR3814 Installation Manual download pdf (Page 21)

17NetShelter 24 U AV Enclosure Installation Manual

Installing Equipment

Warning: To prevent the enclosure from tipping over after equipment installation:

• Make sure you have secured the enclosure before installing equipment.

• Load the heaviest equipment first toward the bottom of the enclosure to prevent the

enclosure from becoming top-heavy.

• Do not extend equipment on sliding rails until you have installed three or more pieces of

similar-sized equipment or until you have installed the stabilizer plate or bolt-down

brackets.

• Do not extend more than one piece of equipment on sliding rails at a time.

Before getting started, make sure you have adjusted the vertical mounting rails as needed. To install

rack-mount equipment in the NetShelter AV Enclosure:

1. Review the equipment manufacturer’s installation instructions.

2. Locate the top and bottom U-space on the vertical mounting rails. Every third hole on the

mounting rails is numbered to indicate the middle of a U-space. A U-space consists of one of

these numbered holes and one hole directly above and below it, as shown.

3. Install the equipment using the #10-32 screws (provided). See the manufacturer’s instructions

provided with the equipment for additional details.

1 U

ns1595a

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

No comments

APC AR3814 Installation Manual Page 21