APC NBWL0455 User's Guide download pdf (Page 48)

41NetBotz Appliance User’s Guide

Visual mode settings

Use Visual Modes to select the camera imager mode and to select the window of interest used when Pan

and Scan mode is active. This window is not available for Pelco PTZ cameras.

The camera pod imager can capture images at resolutions up to 1280x1024, and supports Wide Screen

mode and Pan and Scan mode. Wide Screen mode captures images using the entire 1280x1024 frame,

while Pan and Scan mode captures a selected portion of the total 1280x1024 field of view.

Use the Mode drop-down list to specify the imager mode used by the camera. If you select Pan and

Scan, use the arrow buttons to select the image view. Click OK.

Motion in pan and scan mode. When the camera pod is in Pan and Scan mode and you enable the

Camera Motion sensor, only motion detected within the 640x480 window causes an alert condition. If

you enabled the Show outline of detected motion functionality and specified a Mode in the Cameras

tab that is 800x600 or greater, outlines appear only in the 640x480 window that you specified.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 151 152

No comments

APC NBWL0455 User's Guide Page 48