APC AP9323 Datasheet download pdf (Page 1)

Smoke Sensor—AP9323

Use the mounting bracket to install the sensor in an APC NetShelter

or other standard 19-inch

enclosure. To install in a NetShelter enclosure:

1. Remove the base of the sensor.

2. Attach the base to the bracket, using the 4×8mm screws (provided).

Warn

Do not connect the smoke sensor to anything other than the Environmental

Management System. Doing so could damage the sensor.

Note

The sensor will operate best if placed near the top of the enclosure.

1 2 3 4

Summary of Contents

Page 1 - Smoke Sensor—AP9323

Smoke Sensor—AP9323Use the mounting bracket to install the sensor in an APC NetShelter® or other standard 19-inch enclosure. To install in a NetShelte

Page 2

Smoke Sensor—AP93232Smoke Sensor — AP93233. Route the cable through the hole on the mounting bracket.4. Secure the sensor to the base— rotate it clock

Page 3

Smoke Sensor—AP9323Smoke Sensor — AP9323 37. Turn the mounted sensor over so that the cable points toward the roof of the enclosure. Align the mountin

Page 4 - 990-1363 05/2003

APC Worldwide Customer SupportCustomer support for this or any other APC product is available at no charge in any of the following ways:• Visit the AP

Comments to this Manuals

No comments

APC AP9323 Datasheet Page 1

Browse online or download Datasheet for Smoke detectors APC AP9323. APC Smoke Sensor User Manual

Summary of Contents

Comments to this Manuals