Apc Silcon DP300E Series User Manual download pdf (Page 7)

7User Guide Silcon DP300E Series 480V 400-500kVA

7OA0004 US rev. 02

Start up of system now completed.

2.5 Start (from complete power down)

2.5.1 Starting up Silcon DP3400E – DP3500E

1. Ensure that the system has been at stable environment for at least 12 hours to

ensure any condensation has been evaporated before starting up.

2. Prepare the system by opening the front door(s).

Display shows

3. Switch on the utility power supply

4. Wait about 10 seconds

5. Press

on the keyboard

6. Press on the keyboard

7. Wait about 1 second

8. Wait about 1 minute

9. Close battery MCCB’s in MCCB-box

or battery cubicle.

Please refer to LED indication and labelling

in MCCB-box or battery cubicle.

10. Press the green “ON“ push-button.

11. Close the front door.

Stop, Start & Operating the External Service Bypass Panel

System type XXX

XXX kVA - XXX

Stop charge DC

capacitors : YES

Start charge DC

capacitors : YES

Data stored

Start charge DC

capacitors : YES

Insert fuse or

close MCB

** System OFF **

Normal operation

load power XX%

WARNING:

Do not close the external

battery MCCB’s without the

display showing “Close MCCB”

– otherwise you may damage

the UPS.

If the display shows: “DC

capacitor charge error”, do not

close MCCB, but call for

assistance.

WARNING:

If “Autostart” is active (please

refer to 4.2.1) the UPS will start

automatically after step 9 with

a delay of 1 minute.

NOTE:

If the start up procedure for

any reason is interrupted – wait

until the display shows the step

4 picture and repeat from this

step.

WARNING:

Make sure that all cable con–

nections are in place prior to

starting-up the first time after

having completed the electrical

installation.

NOTE:

After starting-up the system first

time, check that the battery

temperature can be displayed.

(Press 5 and 8 simultaneously

on the display; if not correctly

installed display will show NV

(Not Valid)). It is recommended

to perform a battery capacity

test after having completed the

installation.

1 2 3 4 5 6 7 8 9 10 11 12 ... 37 38

Comments to this Manuals

No comments

Apc Silcon DP300E Series User Manual Page 7

Comments to this Manuals

Related products and manuals for Tools Apc Silcon DP300E Series