APC 900 User Manual download pdf (Page 4)

1.3 For situations where a suitable work area is not

available, the case and plastic plate, which are

included in the 3M

™

Fiber Optic Angle Cleave Kit

2565, can create a work surface. The case can be set

on level ground, on a vehicle, or hung by the hook

and shoulder strap.

1.4 Add one full bottle (1.8 ﬂ. oz./53 ml.) of 99% pure

isopropyl alcohol into lint-free cloth container to

pre-moisten wipes.

2.0 Connector Preparation

2.1 Prior to each termination, clean all tools, including

ﬁber holder, with a lint-free cloth and reagent-grade

isopropyl alcohol.

2.2 Carefully remove connector body from the bag.

Remove the dust caps from the front and rear of the

connector body.

2.3 Open the actuator button on the assembly tool base.

Insert connector into receptacle in the tool with white

actuation cap facing left, pushing forward until it

clicks.

3.0 Fiber Preparation

3.1 Open all three angle cleaver clamps and levers.

3.2 Carefully clean the cleaver clamps using a small

brush.

3.3 For 900 µm buffer ﬁber, cut the buffer. If the 900 µm

slides easily from the ﬁber it is loose tube or semi-

tight buffered ﬁber.

1 2 3 4 5 6 7 8 9 10

No comments

APC 900 User Manual Page 4