APC SURTA48XLBPJ User Manual download pdf (Page 7)

Battery Pack and UPS Connection Procedure

Smart-UPS RT SURTA48XLBP/SURTA48XLBPJ External Battery Pack User Manual 7

b. Install the UPS and battery pack battery covers  and bezels .

6. Go to “Terminal Mode Configuration” on page 9 to configure the UPS to recognize the battery

pack(s).

Battery Pack and UPS Connection Procedure

The battery pack is equipped with the following connectors. Refer to the UPS user manual for UPS

connector types and definitions.

Connectors Type Description

TVSS screw The UPS and battery pack features a Transient Voltage Surge-suppres-

sion (TVSS) screw located on the rear panel, for connecting the ground

cable on surge suppression devices such as telephone and network line

protectors.

OTE: Prior to connecting the grounding cable, turn off the UPS and

disconnect it from the utility power outlet.

battery pack

connector

Smart-UPS RT battery packs provide extended run-time during power

outages. A maximum of 10 battery packs can be used with the UPS.

OTE: See the APC Web site, www.apc.com for information on the

battery pack, SURTA48XLBP or SURTA48XLBPJ.

Caution

Prior to connecting the grounding cable, ensure that the UPS is NOT connected to

utility or battery power circuits. See the UPS user manual for additional

instructions.



1 2 3 4 5 6 7 8 9 10 11 12

No comments

APC SURTA48XLBPJ User Manual Page 7