APC Automatic TransferSwitch Specifications download pdf (Page 11)

Installation

6 Automatic Transfer Switch - Installation and Quick Start

Mount the Automatic Transfer Switch in the enclosure

1. Position the Automatic Transfer Switch in front of the mounted rear adjustable bracket

segments.

2. Align the front and rear adjustable bracket segments, and slide the front segments onto the rear

segments.

3. Align the mounting brackets on the switch with the enclosure’s front vertical mounting rails and

insert caged nuts (provided) in the appropriate holes on the front vertical mounting rails.

4. Insert and tighten the mounting screws (provided).

5. Insert slide screws and nuts (removed previously) into each adjustable bracket, and tighten them

to secure the positions of the adjustable brackets.

Heavy

Two people should perform this procedure.

mph0012a

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 26 27

No comments

APC Automatic TransferSwitch Specifications Page 11