APC AP9622 User Manual download pdf (Page 2)

Installing Multiple Management Cards

Two models of expansion chassis

If you need management card slots in addition to those in your UPS, use one or

more expansion chassis available from APC.

Installing cards in an expansion chassis

Install the lowest-priority cards in any available card slots in the UPS, and then

use an expansion chassis for remaining higher-priority cards. In a Triple

Expansion Chassis:

• Install each card, starting with the lowest priority (see “Before you start”

on page 1) in the lowest-numbered slot.

• If you are installing a Network Management Card, install it in slot 3,

even if you are leaving another slot empty.

Installing cards in expansion chassis set up serially

If you have increased your management card capacity by connecting multiple

expansion chassis serially (in a cascading setup), install the Network

Management Card in the highest-numbered slot, and the Out-of-Band

Management Card in the second-highest-numbered slot of the chassis installed

farthest from the UPS.

Warning: Do not attach more than two Network Management

Cards or one Building Management Integration Card to a UPS.

If the Network Management Card is pre-installed in the UPS, refer instead to

“When a management card has been pre-installed” on page 4.

Chassis Compatible UPSs

Expansion Chassis (AP9600), one slot APC UPSs that are not installed

in a rack or enclosure.

Triple Expansion Chassis (AP9604BLK), three

slots

All APC UPSs

Status

Power

Monitoring Port

To U P S

24 VDC

–+–

Probes

1 2

Sensor Zones

AP9612 TH Envi ronmenta l Moni toring Car d

1 2 3 4

GND

Management Port

Stat us

AP9608 Out- of-Band M anagemen t Card

Smar t Sl ot

A 963 Network Management Card 2P1

USB

Config

Universal I/O Universal I/O

Reset

10/100

Network

mph0461

1 2 3 4

Management Port 2

Comments to this Manuals

No comments

APC AP9622 User Manual Page 2

Comments to this Manuals

Related products and manuals for Networking APC AP9622