APC Switched Rack Power Distribution Unit (PDU) User's Guide download pdf (Page 71)

®®

USER’S GUIDE

switched rack pdu

SNMP

An Access option (the Settings option in the control console) enables (by

default) or disables SNMP. When SNMP is enabled, the Access Control

settings allow you to control how each of the four available SNMP channels

is used.

To define up to four NMSs to serve as trap receivers, see

Trap receiver settings.

Setting Definition

Community

Name

Defines the password (maximum of 15 characters) that an NMS defined

by the NMS IP setting uses to access the channel.

NMS IP

Limits access to the NMS or NMSs specified by the format used for the IP

address.

• 159.215.12.1 allows only the NMS with that IP address to have access.

• 159.215.12.255 allows access for any NMS on the 159.215.12

segment.

• 159.215.255.255 allows access for any NMS on the 159.215 segment.

• 159.255.255.255 allows access for any NMS on the 159 segment.

• 0.0.0.0 or 255.255.255.255 allows access for any NMS.

Access

Type

Selects how the NMS defined by the NMS IP setting can use the channel

when that NMS uses the correct value for Community Name.

Read

The NMS can use GETs at any time, but it can never use

SETs.

Write

The NMS can use GETs at any time, and can use SETs

when no one is logged onto either the control console or

Web interface.

Disabled The NMS cannot use GETs or SETs.

Write+

The NMS can use GETs and SETs at any time, even

when someone is logged onto the control console or

Web interface.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 92 93

No comments

APC Switched Rack Power Distribution Unit (PDU) User's Guide Page 71