APC AP9830 Datasheet download pdf (Page 14)

Configuration and Setup

Overview

To configure and set up the Remote Power-Off Device:

1. Configure the RPO to operate in Test (Disabled) power-

off mode by setting DIP switch #3 to the up position.

2. Connect the RPO.

3. Test the RPO while leaving DIP switch #3 in the up

position.

4. Configure the RPO to operate in the Enabled power-off

mode by setting DIP switch #3 to the down position (for

normal operation).

See “Set up the Remote Power-Off Device”

on page 14.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

No comments

APC AP9830 Datasheet Page 14