APC AP88XX User Manual download pdf (Page 7)

990-3864E

2.4 BUGS FIXED IN THIS VERSION SINCE RPDU2 v512

1. AP86XX SKUs may temporarily display "Component communications lost with

Outlet Board X Meter" alarm during outlet control actions.

2. Event logs for outlet scheduling will sometimes generate events

with inaccurate outlet numbers.

3. When controlling outlets using the SNMP OID "rPDU2DeviceControlCommand"

and an IPv6 address, the command may take longer to finish than expected.

4. Bank current screen is missing on the LCD display for SKUs AP8641,

AP8841, AP8865, AP8887, AP8941, AP8965.

5. SNMP OID walks will sometimes encounter an unexpected delay.

Workaround is to configure the SNMP agent for a short timeout, such

as less than 5 seconds. The first retry will return quickly.

6. Fixed issue of datalog taking up too much flash space by reducing maximum

number of datalog records from 2000 to 1000.

_____________________________________________

3.0 APC Device IP Configuration Wizard v5.0.1

_____________________________________________

3.1 COMPATIBILITY

apc_hw05_aos_519.bin and prior Network Management

Card OS & TCP/IP Stack

_________________

4.0 Miscellaneous

_________________

4.1 RECOVERING FROM A LOST PASSWORD

See the User's Guide on the APC Web site (www.apc.com) for instructions on

how to recover from a lost password.

4.2 EVENT SUPPORT LIST

For the event names and event codes for all events supported for a

currently connected APC device, first retrieve the config.ini file from

the RPDU.

To use FTP to retrieve the config.ini file from a configured RPDU:

1. Open a connection to the RPDU, using its IP Address:

ftp> open <ip_address>

2. Log on using the Administrator user name and password.

3. Retrieve the config.ini file containing the settings of the RPDU.

ftp> get config.ini

The file is written to the folder from which you launched FTP.

Page 7

1 2 3 4 5 6 7 8

No comments

APC AP88XX User Manual Page 7