APC Rack PDU,Basic, Zero U,5.7kW,120&208V Specifications download pdf (Page 4)

How to Install the Rack PDU

4 Rack Power Distribution Unit — AP7562, AP7563, AP7564

Mounting options

You can install the Rack PDU in one of two ways: using toolless

mounting pegs (provided) or the mounting brackets (provided).

• To install the Rack PDU using the toolless mounting method,

install it in the rear of the NetShelter VX Enclosure, in the cable

channel directly behind the rear vertical mounting rails.

• To install the Rack PDU using the mounting brackets, install it on a

vertical mounting rail on your rack or enclosure.

Toolless mounting

1. Slide the mounting pegs into the holes located in the channel in the

rear panel of the enclosure.

2. Snap the Rack PDU into place by pushing it downward until it

locks into position.

Note

You can mount two Rack PDUs on one side of the enclosure

by using the toolless mounting method.

1 2 3 4 5 6 7 8 9 10

No comments

APC Rack PDU,Basic, Zero U,5.7kW,120&208V Specifications Page 4