APC LX Installation Manual download pdf (Page 10)

Post-Installation System Checklist Procedures

8 Symmetra

LX Start Up Guide

Post-Installation System Checklist Procedures

Complete the tasks in the system checklist to ensure that the UPS is properly installed.

UPS System Checklist

1 . Ensure that the “Post-Installation Procedures for the UPS,” beginning on page 2 are successfully

completed.

2 . If your configuration includes Extended Run Cabinet(s), ensure that the “Post-Installation

Procedures for the Extended Run Cabinet (Optional),” beginning on page 5 are successfully

completed.

3 . If your equipment is installed in a rack, ensure that all components are securely mounted.

4 . Ensure that all modules (power, battery, and intelligence) are fully installed.

5 . Check that the PowerView is connected to the primary Intelligence Module (IM).

6 . Turn ON the AC utility power to the UPS.

7 . Turn ON the Input Circuit Breaker

and System Enable

switches.

8 . The system will make some clicking sounds as it powers up, and may display fault messages on

the PowerView display. Disregard the messages at this time. Press the 'Esc' button until the

Monitoring screen is displayed.

9 . Turn the Maintenance Bypass

switch ON.

10.Disregard any LED indicators or messages on the PowerView. Press the 'Esc' button until the

monitoring screen is displayed.

Note

Refer to the Symmetra

LX Physical Installation Manual and the Symmetra

Electrical Installation Manual for detailed information concerning the steps

outlined in the checklist procedures.

200/208 V

220/230/240 V

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

APC LX Installation Manual Page 10