9NetBotz Rack Monitor 450/550 Installation and Quick Configuration Manual
Connect an Alarm Beacon and Other Optional
Devices
1. Install an alarm beacon:
– Install the alarm beacon in a visible position either
on the roof of the rack or inside the rack.
– Route the alarm beacon cable to the appliance.
The alarm beacon cable may be extended to a
maximum of 100 m (328 ft), using RJ-45
couplings and standard CAT-5 cables.
– Connect the cable to the Alarm Beacon port.
2. Connect one device to the Voltage Output.
Caution: Relay Outputs can only be connected to Class 2 circuits.
3. Connect up to two devices to the Relay Outputs.
4. Connect a NetBotz Rope Leak Sensor to the Leak Rope port.
Comments to this Manuals