APC AP5717CH User Manual download pdf (Page 9)

5User Manual Rack LCD Console

Item Number Component Description

 EXIT button 1. Pressing the EXIT button without opening the On Screen Display

(OSD) initiates an auto adjustment which reconfigures all settings for

the monitor to the optimum display values of the OSD.

2. While the OSD user interface is in use, press the EXIT button to exit

the current menu and return to the previous menu or, press the EXIT

button to leave an adjustment menu when the adjustment is

complete.

3. From the Main Menu screen, pressing the EXIT button, will exit the

OSD.

 Left/Down Arrows

button

Pressing this button moves left or down through the menu and

decreases the value when making an adjustment.

 Right/Up Arrows

button

Pressing this button moves right or up through the menu and

increases the value when making an adjustment.

 MENU button 1. If the OSD user interface has not been opened, pressing the

MENU button initiates it and brings up the Main menu.

2. While the OSD user interface is in use, when a setting choice is

reached, pressing the MENU button brings up the setting’s

adjustment screen.

 LCD POWER button Turns on power to the LCD monitor. An LED light next to the switch

will illuminate when the monitor is in stand-by (power-saver) mode.

 UPGRADE port An RJ-11 port to be used to transfer firmware upgrades from the

administrator’s server to the Rack LCD Console.

 FW UPGRADE

NORMAL / RECOVERY

The Firmware Upgrade switch should be in the NORMAL position

during normal operation of the Rack LCD Console. The switch is set

to RECOVERY only when a Firmware Upgrade Recovery is

performed. (See “Firmware upgrade recovery” on page 12 for more

information.)

 LCD monitor The LCD display monitor of the Rack LCD Console.

 RESET switch Press this recessed switch in with a small object (a pen point) to

perform a system reset.

 SCROLL LOCK LED When illuminated, the SCROLL LOCK LED indicates the scroll lock

function on the keyboard is enabled.

 CAPS LOCK LED When illuminated, the CAPS LOCK LED indicates the capitals lock

function on the keyboard is enabled.

 NUM LOCK LED When illuminated, the NUM LOCK LED indicates the number lock

function on the keyboard is enabled.

 USB port Located on the front of the Rack LCD Console, the USB port is used

to connect a peripheral device (flash drive, CD-ROM drive, or mouse)

and pass through the Rack LCD Console to the connected target

device (a KVM switch or server).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments

APC AP5717CH User Manual Page 9

Comments to this Manuals