APC MGE Galaxy 300 User's Guide download pdf (Page 27)

18Network Management Card User’s Guide

ftp

Access: Administrator only

Description: Enable or disable access to the FTP server. Optionally, change the port setting to the

number of any unused port from 5001 to 32768 for added security.

Example: To change the TCP/IP port to 5001, type:

ftp -p 5001

help

Access: Administrator, Device User

Description: View a list of all the CLI commands available to your account type. To view help text for

a specific command, type the command followed by the

help command: user help

Example 1: To view a list of commands available to a Device User, type:

help

Example 2: To view a list of options that are accepted by the alarmcount command, type:

alarmcount ?

modbus

Access: Administrator only

Description: Manually configure these Modbus settings for the Management Card:

Option Argument Definition

-p <port number> Define the TCP/IP port that the FTP server uses to communicate with the

Management Card (21 by default). The FTP server uses both the specified

port and the port one number lower than the specified port.

-S enable | disable Configure access to the FTP server.

Option Argument Description

-p Display the configured Modbus parameters.

-a enable | disable Enable or disable the Modbus feature.

-br 9600 | 19200 Set the baud rate.

-pr even | odd | none Set the parity bit.

-s <slave # in hex> Set the Modbus slave address.

-o master | slave Define the mode of operation for the Modbus feature. (MGE Galaxy

models only)

-rt <timeout in mSec> Set the response timeout in milliseconds for query packets in Master

mode. (MGE Galaxy models only)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 104 105

No comments

APC MGE Galaxy 300 User's Guide Page 27