APC NBWL0356 User's Guide download pdf (Page 121)

113NetBotz Appliance User’s Guide

Creating a send SNMP v3 inform alert action

To create an Alert Action to use Send SNMP v3 Inform alert notification:

1. Double-click the Alert Actions icon.

2. Click Add... to open the Add Alert Action window.

3. Select Send SNMP v3 Inform and click OK.

4. Enter a name for this alert action in Alert action name.

5. Specify Advanced Scheduling (optional). By default, all Alert Actions are active 24 hours a day,

7 days a week. You can specify an Alert Action to be active only when alert conditions occur

during specific time ranges. To configure Advanced Scheduling:

a. Click Advanced Scheduling.... The Advanced Scheduling window opens.

b. By default, all time periods are Enabled. To disable the alert action, click-and-drag to

highlight the time range, and click Disable. To enable a disabled time range, click-and-drag

to highlight the time range, and click Enable.

c. Click OK to save the schedule and return to the Add Alert Action window.

6. Check the alert Severities that apply to buttons to be activated.

7. In the Basic tab:

a. In Target Host Address, enter the Hostname or IP address of the SNMP based

management system.

b. Enter the Authentication User ID.

c. Enter the Authentication Password, and Verify Password.

d. Select an Authentication Protocol.

8. In the Advanced tab:

a. Enter the Inform Port Number and the Encryption Protocol.

b. Enter the Encryption Password (blank=use auth-pwd) and Verify Password.

9. Click OK to save this Alert Action.

Creating a send wireless SMS message alert action

To create an Alert Action to use Send Wireless SMS Message alert notification: