Apc SILCON 990-4053 User Manual download pdf (Page 5)

Introduction

990-4053

Installation Guide APC Silcon 480kW 400V UPS 5

1.0 Introduction

Power regulation varies from country to country, and information given in this installation

guide can therefore only be of a general nature. Electricians should therefore always refer to

national and local electrical codes prior to installing the UPS system.

1.1 Tools and Equipment

This section lists all tools and equipment required to install all UPS configurations. See also

section 4.0 of this guide for further details on connection.

Tools:

• 10mm socket

• 13mm socket-deep

• 17mm socket

• 19mm socket-deep

• 19mm combo wrench

• Small flat head/regular screwdriver

• #3 philips screwdriver

• Compression lug crimping tool

• Knock-out set (for glands)

Equipment:

• Compression lugs for cable terminations

• Cable to Service Bypass Panel from system feeder

• Cable to UPS input from Service Bypass Panel

• Cable to Service Bypass Panel from UPS output

• Cable from Service Bypass Panel to customer distribution

• Cable to UPS input from external batteries/external Battery Breaker Box

(systems with external battery)

• Solid core, control cable to UPS from Service Bypass Panel

• Solid core, control cable to UPS from external batteries/external Battery

Breaker Box

CAUTION!

Heavy equipment. To prevent personal injury or equipment damage, take extreme care when

handling and transporting UPS cabinet and equipment.

CAUTION!

Ensure that front doors are in place and that internal front cover is fastened by screws before

attempting to lift or transport the system.

1 2 3 4 5 6 7 8 9 10 ... 75 76

No comments

Apc SILCON 990-4053 User Manual Page 5