APC BK600EI User Manual download pdf (Page 10)

Page 8

3.0 Installation

3.1 Receiving inspection

Once the UPS has been removed from its shipping container, it should be inspected for

damage that may have occurred while in transit. Immediately notify the carrier and place

of purchase if any damage is found. Two output jumper cords are provided with the UPS.

The packing materials are recyclable. Save for reuse or disposed of them properly.

3.2 Placement

The UPS may be installed in any protected environment. The location should provide

adequate air flow around the unit, in an atmosphere free from excessive dust, corrosive

fumes or conductive contaminants. Do not operate the UPS in an environment where the

ambient temperature or humidity is outside the limits given in the Specifications section

of this manual.

3.3 Load types

The UPS is designed to power all modern computer loads and associated peripheral

devices such as monitors, modems, cartridge tape drives, external floppy drives, etc. The

UPS is not rated to power life support equipment (as described on the rear cover of this

manual).

Caution: The output waveform of this UPS is a sine wave approximation suitable for use

with modern computer power supplies. Other load types may malfunction. In particular,

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

No comments

APC BK600EI User Manual Page 10