APC SUVTR30KH3B5S Datasheet download pdf (Page 18)

Overview – Display Overview

12 Smart-UPS® VT ISX 20-30 kVA, 208/220/480V Operation

Language selection.

From the Main Menu, select Display Setup.

To change the language, select Language, and press ENTER. The Language line is now active. Use the

UP/DOWN arrows to select the desired language. Press ENTER to confirm your selection.

Contrast setting.

From the Display Setup Menu, select Contrast.

To change the contrast, select Contrast, and press ENTER. Use the UP/DOWN arrows to select the

contrast level - the lower the number, the darker the contrast. Select ENTER to confirm the setting.

Beeper setup.

From the Beeper Setup Menu, select Beeper Setup.

To change the beeper setup, select Beep at and press ENTER. You now have the following options:

• Never: If you select this setting, the Beeper will be active at internal UPS errors only.

• PwrFail+30: If you select this setting, the Beeper will be active at Internal UPS errors and at main

or bypass errors. The Beeper will only sound if the fault has been present for more than 30 seconds.

• PwrFail: If you select this setting, the Beeper will be active at Internal UPS errors and at main or

bypass errors. The Beeper will sound immediately the error is occurring.

• Low Batt: If you select this setting, the Beeper will be active at internal UPS errors and at main or

bypass errors and at power failures and at low battery level (if the UPS runs in battery operation).

Press ENTER to confirm your setting, or ESC to cancel.

Vo l :

The default setting is low. This setting can be changed to medium, high, or Off. Press ENTER to confirm

your setting, or ESC to cancel.

Key Click:

The default Key Click function is set to Off. Select On if you want to change this setting to On. Press

ENTER to confirm your setting, or ESC to cancel. Press ESC to return to previous screen.

Diagnostics screen

From the Diags screen on the Main Menu, you can view the information given on failures for use in

troubleshooting.

• From the Main Menu, select Diags, and press ENTER

• Use UP/DOWN arrow to select Fault and Diagnostics and press ENTER

Beeper setup

Beep at: PwrFail+30

Vol: Low

Key Click: Off

Beeper Setup Menu

Control

Status

Setup

Logging

Display

Diags

Help

Main Menu

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comments to this Manuals

No comments

APC SUVTR30KH3B5S Datasheet Page 18

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) APC SUVTR30KH3B5S