APC ACRD201 Specifications download pdf (Page 37)

31InRow RD Fluid Cooled Installation

Top routing

1. Remove the electrical junction box

cover.

2. Route electrical cabling into the

electrical junction box as shown.

3. Secure the incoming cable with a

standard 20 mm (3/4-in) nominal

conduit strain relief (not provided).

4. Connect the power wiring to the

terminals as shown and torque the

screws to the value shown on the label.

5. Reinstall the electrical junction box

cover.

Bottom routing

1. Carefully clip all the cable clamps that secure the electrical

cable to the cabinet frame. Remove the cable clamps from the

cabinet and discard.

2. Remove two screws securing the electrical junction box to the

underside of the cabinet top.

3. Remove the plug from the cabinet floor and insert it in the

cabinet top.

4. Turn the electrical junction box over and secure it to the bottom

of the cabinet using the screws removed in step 1. See “Bottom

piping and power access locations” on page 10.

5. Secure the electrical cable to the cabinet frame using new cable

clamps (supplied).

6. To connect electrical power, follow the steps for top routing.

na2645a

na2646a

1 2 ... 32 33 34 35 36 37 38 39 40

No comments

APC ACRD201 Specifications Page 37