Apc AP7003 User Manual download pdf (Page 11)

Operation

Power Turn the unit on or off by pressing the Power button.

Cooling • To select the Cooling mode, press the Mode button

until the cooling mode indicator appears in the

LCD

window.

• Set the fan speed by pressing the Fan Speed button.

The fan speed indicator in the

LCD window will

display what speed has been selected - high, medium or

low.

• Set the temperature by pressing the Temperature button

up or down arrow . The

LCD window will display

the current temperature selected.

Dehumidify • To select the Dehumidify mode, press the Mode

button until the dehumidify mode indicator

appears in the

LCD window.

• Check that the condensate tank is empty and is properly

seated.

• Do not use the exhaust duct.

Note: Fan speed cannot be adjusted when in

Dehumidify mode.

Fan • To select the Fan Mode, press the Mode button

until the fan icon appears in the

LCD window.

• Set the fan speed by pressing the Fan Speed button .

The fan speed indicator in the

LCD window will

display what speed has been selected - high, medium or

low.

Louver Press the Louver button to automatically provide even air

distribution. The louver

on indicator will appear in the

LCD

window when this mode is on.

Note: You can direct the airflow to an even more specific area

by adjusting the manual louvers.

Continued on next page

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Apc AP7003 User Manual Page 11