Apc AP7003 User Manual download pdf (Page 13)

Installing the Exhaust Kit

Installing into

ceiling plenum

For this installation you will need the following:

• The ceiling adapter

• The holder flange

• The exhaust duct

• The base flange

Note: There should be about 12 to 15 inches of open space

above the ceiling adapter opening so that exhaust air is

not blocked

1. The exhaust duct is 8.5 feet long. Insert about 6 inches of

one end of the exhaust duct into the round hole in the ceil-

ing adapter.

2. Extend the 6 inches of the exhaust duct you have just

inserted and screw the holder flange as far as it will go onto

the exhaust duct.

3. Slide the ceiling tile out of the way about 10 to 12 inches.

4. Put the ceiling adapter into the ceiling tile grid.

Continued on next page

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Apc AP7003 User Manual Page 13