APC KVM 2G User Manual download pdf (Page 118)

KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual 106

4. Select either Obtain an IP address automatically (DHCP), or Specify an IP address. If you chose

the latter, fill the IP Address, Subnet Mask, and Gateway fields with the information appropriate

to your network.

5. Click Set IP.

6. After the IP address shows up in the Device List, click Exit.

Browser

1. Set your client computer's IP address to 192.168.0.XXX where XXX represents any number or

numbers except 60. (192.168.0.60 is the default address of the KVM switch.)

2. Specify the switch's default IP address (192.168.0.60) in your browser to be able to connect.

3. Assign a fixed IP address for the KVM switch that is suitable for the network segment on which

it resides.

4. After logging out, reset your client computer's IP address to its original value.

IPv6

The KVM switch supports three IPv6 address protocols: Link Local IPv6 Address, IPv6 Stateless

Autoconfiguration, and Stateful Autoconfiguration (DHCPv6).

Link Local IPv6 Address. The KVM switch is automatically configured with a Link Local IPv6

Address (for example, fe80::210:74ff:fe61:1ef). To find out what the Link Local IPv6 Address is, log in

with the KVM switch's IPv4 address and open the Device Management > Device Information page. The

address is displayed in the General list box.

Once the IPv6 address has been determined, it can be used when logging in from a browser or the Win

and Java Client AP programs. For example: If you are logging in from a browser, enter http://

[fe80::2001:74ff:fe6e:59%5] for the URL bar. If you are logging in with the AP program, enter:

fe80::2001:74ff:fe6e:59%5 for the IP field of the Server panel.

Note: 1. To log in with the Link Local IPv6 Address, the client computer must be on the

same local network segment as the KVM switch.

2. The %5 is the %interface used by the client computer. To see your client computer's IPv6

address: from the command line issue the following command: ipconfig /all. The % value

appears at the end of the IPv6 address.

IPv6 Stateless Autoconfiguration. If the KVM switch's network environment contains a device (such

as a router) that supports the IPv6 Stateless Autoconfiguration function, the KVM switch can obtain its

prefix information from that device in order to generate its IPv6 address. For example,

2001::74ff:fe6e:59.

The address is displayed in the General list box of the Device Management > Device Information page.

Once the IPv6 address has been determined, it can be used when logging in from a browser or the Win

and Java Client AP programs. For example: If you are logging in from a browser, enter http://

[2001::74ff:fe6e:59] for the URL bar. If you are logging in with the AP program, you would enter:

2001::74ff:fe6e:59 for the IP field of the Server panel (see “Windows Client AP Login” on page 20).

Port Forwarding

For devices located behind a router, port forwarding allows the router to pass data coming in over a

specific port to a specific device. By setting the port forwarding parameters, you tell the router to which

device the data that comes in over a particular port is sent.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 133 134

No comments

APC KVM 2G User Manual Page 118