APC AP8959NA3 User Manual download pdf (Page 8)

REFERENCE GUIDE

Management Information Base

• Configure the date and time on a Management Card or other device.

mconfigBOOTPEnabled

mconfigNumTrapReceivers

{mconfigTrapReceiverTable}

[mconfigTrapReceiverEntry]

trapIndex

receiverAddr

communityString

severity (obsolete: always returns 0)

acceptThisReceiver

receiveTrapType (obsolete: always returns 1)

mconfigClock

mconfigClockDate

mconfigClockTime

Control the agent’s rebooting behavior

Use the one [mcontrol] OID to control when a Network Management Card or network-

enabled device reboots and whether basic network settings or agent code are

changed. No reboot occurs if a user is logged on to the Management Card or device.

mcontrolRestartAgent

Use the available values described in the MIB file to do any of the following:

• Reboot the Management Card or device now.

• Download new agent code (if available) and reboot the Management Card or device.

• Reset basic TCP/IP settings of the Management Card or device to their defaults

(optionally including the resetting of its boot mode to DHCP and BOOTP) and

perform a reboot.

Value 3 now applies to the Network Management Card and to other APC

network-enabled devices. The three PowerNet adapters mentioned in the

description in the MIB file for value 3 are not longer sold by APC.

Value 4 is now obsolete.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

APC AP8959NA3 User Manual Page 8