APC NBWL0356 User's Guide download pdf (Page 46)

38NetBotz Appliance User’s Guide

Capture settings

Select a camera from the Camera Pods window and click Capture to open the Camera Capture

Settings window. From this window you can configure the following settings:

Note: Fields displayed may vary depending on the features of the camera selected.

Field Description

Brightness The brightness of the image captured by the camera, from 0 to 255.

Gamma correction Adjust the overall brightness of the camera image. Images not

properly corrected can look either bleached out or too dark.

Video format The format in which video is transmitted by the video source.

Note: This option is available only when configuring Capture

settings for CCTV adapter pods.

Rotate camera image 180 degrees Rotate the image captured by the camera 180 degrees.

Note: This option is not available when configuring Capture

settings for CCTV adapter pods.

Flicker filter Minimize image brightness flickering that can occur in the dark

areas of the image.

Note: Enabling the flicker filter can impact the number of frames

per second at which images are captured and displayed, typically

noticeable only at image capture rates more than 5 per second.

Note: This option is available only when configuring Capture

settings for NetBotz Camera Pod 120s, Revision A0, Submodel

120-0000 or earlier. For revision and submodel details, click the

About button to open the About View.

Timestamp Set the location of the timestamp on the image capture.

Color Balance / Type of Lighting /

Red Balance / Blue Balance

The color balance settings used by the camera:

• Fluorescent: Best for locations with fluorescent lighting.

• Incandescent: Best for locations with incandescent lighting.

• Daylight: Best for locations with natural lighting.

• Auto-detect: Analyzes the lighting conditions and automatically

selects the best setting.

Select Custom to specify Red Balance and Blue Balance.

Mode The resolution of images captured for alert notifications. This

setting does not affect the image resolution displayed in the Camera

View.

Maximum Rate The maximum rate at which images are captured when a picture

alert is generated. This does not affect the image refresh rate

displayed in the Cameras View.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 134 135

No comments

APC NBWL0356 User's Guide Page 46