APC INROOM ACPSC3000 Operations Instructions download pdf (Page 95)

95InRoom Controller - Operating Instructions

InRoom Controller

Pos. A

Pos. B

COM 1

Pos. 1-2

Pos. 2-3

For the control system there are two types of software. The

essential control software is located in the Flash-EPROM

on the IOC-board. The second software contains the menu

structure and is located in the EPROM of the InRoom Con-

troller board.

The control parameters in the IOC are resistent and do

not have to be re-entered after loading the software. This

is also the case for the IO bus conﬁguration of the InRoom

Controller.

To load software in the ﬂash-EPROM of the IOC you must

connect the service port of the IOC to a serial interface

of your computer (System requirements: Windows 95/98/

NT/2000/ME/XP) by means of a RS232 modem connec

tion.

Turn off the master switch. Set the jumper JP7 to position 2-3.

Turn on the master switch. The IOC is now in the Download-

mode. Start the program "InRoom-Service.exe" on your PC.

This program can be downloaded from the APC website.

After the new software has been loaded, the master switch

must be turned off and the jumper JP7 must be set in the

position 1-2.

To load software in the ﬂash-EPROM of the InRoom Con

troller you must connect the service port of the InRoom

Controller to a serial interface of your computer by means

of a RS232 modem connection.

Turn off the master switch. After this the jumper X6 must be

set to position A. Turn on the master switch. The InRoom

Controller is now in the Download-mode. Start the program

"InRoom-Service.exe" on your PC.

After the new software has been loaded, turn off the master

switch and set the jumper X6 to position B. When turning on,

ensure that the new version number is correctly displayed.

In the next step all parameters, if they deviate from the default

settings and the bus conﬁguration, must be readjusted. The

default language is English. If you require another language,

you can change this in the "Control\Preferences\Languages"

menu.

8.1 Loading new Software

RS 232 - modem con-

nection with 2x9 poles

Sub-D (Female)

Board rear side

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 105 106

Comments to this Manuals

No comments

APC INROOM ACPSC3000 Operations Instructions Page 95

Comments to this Manuals