Apc VS 50 User Manual download pdf (Page 48)

Magnum VS –48 Vdc User’s Manual Page 43

PARAMETER NAME/

[MENU LOCATION]

DESCRIPTION SETTINGS (Default

settings in BOLD)

Output Relay 1 Alias

[System/Out-Rly/Alias]

•

•

•

Output Relay 6 Alias

[System/Out-Rly/Alias]

An alternate name (alias) can be

assigned to Output Relay 1 if desired.

•

•

An alternate name (alias) can be

assigned to Output Relay 6 if desired.

Output Relay 1

•

•

•

Output Relay 6

Output Relay 1 Delay

[I/O/Output]

•

•

•

Output Relay 6 Delay

[I/O/Output]

Delay between sensing of the alarm

condition and activation of the mapped

relay. An alarm condition must exist for

longer than the delay to be activated.

0.00 seconds – 600.00

seconds, 0.00 seconds

Rectifier 1-of-N Alarm

[Power Modules/Rectifiers]

Defines the output relay that is energized

if Rectifier Fail 1-of-N alarm occurs. This

is a special rectifier alarm group that

signifies that one rectifier has at least

one alarm condition.

Ignore, Minor, Major

Output Relay 1-6

Rectifier 2-of-N Alarm

[Power Modules/Rectifiers]

Defines the output relay that is energized

if Rectifier Fail 2-of-N alarm occurs This

is a special rectifier alarm group that

signifies that more than one rectifier has

at least one alarm condition.

Ignore, Minor, Major

Output Relay 1-6

Rectifier Configuration Alarm

[Power Modules/Rectifiers]

Defines the output relay that is that is

energized a rectifier is added to any

empty slot after the dc system is

powered up or configured. This feature

is supported by the standard SNMP card

monitor, but is not supported by this dc

system.

Ignore, Minor, Major

Output Relay 1-6, n of N

Rectifier Current Limit Alarm

[Power Modules/Rectifiers]

Defines the output relay that is energized

or special rectifier alarm group n of N that

occurs when a rectifier has been forced

into the current limited mode.

Ignore, Minor, Major

Output Relay 1-6, n of N

Rectifier Current Output Status

{Status Only}

[Power Modules/Rectifiers]

A display of the dc output current for the

individual rectifier.

Status Only

Rectifier Description

{Status Only}

[Power Modules/Rectifiers]

Displays the model number of the

installed rectifier.

Status Only

Rectifier Diagnostic Alarm

[Power Modules/Rectifiers]

This feature is not needed in this

particular configuration.

Ignore, Minor, Major

Output Relay 1-6, n of N

Rectifier Fan Fail Alarm

[Power Modules/Rectifiers]

Defines the output relay that is energized

or special rectifier alarm group n of N that

occurs when a rectifier fan has failed.

Ignore, Minor, Major

Output Relay 1-6

, n of N

Rectifier Fan Fail Alarm Status

{Status Only}

[Power Modules/Rectifiers]

The status will be “ON” if the rectifier fan

has failed.

Status Only

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 64 65

Comments to this Manuals

No comments