SRC96XLBP / SRC96XLBP2S User Manual 3
Introduction
Overview
The American Power Conversion (APC
®
) SRC96XLBP external battery pack (XLBP) connects to an
APC Smart-UPS
®
RC. Together these units provide extended protection for electronic equipment (load)
from utility power blackouts, brownouts, sags and surges. The UPS and the XLBP together provide
continuous power from the batteries until utility power returns to safe levels or the batteries are fully
discharged.
Inventory
Read the Safety Guide before installing the unit.
Inspect the battery pack upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the battery pack package contents:
NOTE: The model and serial numbers are located on a small, rear panel label. For some models, an
additional label is located on the chassis under the front bezel.
Accessories
Install accessories prior to connecting power to the UPS.
Refer to the APC Web site, www.apc.com for available accessories.
Optional accessories
• Additional external battery packs (XLBP)
• Additional battery strings
• 4-post rail kit
• External Battery Pack (XLBP)
• Front bezel
• Stabilizer/rack-mount brackets
• XLBP connector cable
• Hardware supplied listed in table below
• Literature kit containing:
– Product documentation
– Smart-UPS
®
RC User Manuals CD
– Safety information
– Warranty information
8
2
2
su0211a
8
Hardware supplied
Rack-mount configuration:
Pan head screws for securing rack-mount brackets to unit
Tower configuration:
Flat head screws for securing stabilizer brackets unit
Rack-mount configuration brackets
Tower configuration stabilizer brackets
Rack-mount configuration:
Washers for securing rack-mount brackets to unit
Comments to this Manuals