APC NETWORKAIR ACPA4000 User Manual download pdf (Page 27)

19NetworkAIR ACPA4000

Change settings

To change a setting, use the up or down arrow keys to move the selector arrow to the setting and press

the

ENTER key.

List of choices. If the setting is a list of choices, an input arrow is displayed next to the setting. Press

the up or down arrow key to make your selection. Press the

ENTER keys to save the setting and exit from

input mode. Press the

ESC key to exit without saving.

Numbers or text fields. If the setting is a number or text field, use the arrow keys to select the value

for the first character and press the

ENTER key to move to the next character position. Repeat this

procedure to select and set each character. After the last character is set, press the

ENTER key to save the

setting and exit from input mode. Press the

ESC key to exit without saving.

Password entry

To change any setting, you are prompted to enter your password. The default password is APC. To enter

each character or digit of the password, use the up and down arrow keys to scroll to the character and

press the

ENTER key. The cursor moves to the next position. After entering the last character of the

password, press the

ENTER key again to submit the password.

Note: Passwords are case-sensitive.

Turn off the equipment

Path: Main Menu > On/Off.

To shut off the equipment, select the On/Off option on the main menu and change the setting to Off.

Note: Change the setting to Off to shut down the cool mode and the blower fan. The display

continues to receive power.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

No comments

APC NETWORKAIR ACPA4000 User Manual Page 27