APC BDP-95 User Manual download pdf (Page 61)

SETUP MENU OPTIONS

7. Output Resolution: To choose the output resolution that best matches your television’s native

resolution. For a detailed description on how to choose a proper output resolution, please refer

to the Select the Best Output Resolution se

ction on page 24 of this manual.

8. 1080p

24 Output: To set 1080p 24Hz output options. This option only applies to the HDMI

output at 1080p resolution. Many Blu-ray Discs that originated from theatrical movies are

encoded using 24Hz frame rate, the same number of frames per second as the original

theatrical film. If the TV properly supports 1080p 24Hz, smoother motion can be achieved by

enabling 1080p24 Output for such discs. The available options are:

• Auto – Video encoded in 24Hz frame rate will be output as 1080p 24Hz if the TV informs

the player that it can support the 1080p24 signal.

• On – Video encoded in 24Hz frame rate will be output as 1080p 24Hz without regard to

whether the TV can support the 1080p24 signal or not. This is useful if the TV can actually

support 1080p24 but does not properly state its capability. Please note that if the TV cannot

support 1080p24, selecting this option will result in no video.

• Off (default) – Video encoded in 24Hz frame rate will be converted to 60Hz (NTSC) or

50Hz (PAL)

9. HDMI Options: To configure video options that apply only to the HDMI output. This item

contains a sub-menu with multiple configuration options. Please refer to the HDMI Options

ction on page 59 of this manual for details of each option.

10. Display

Options: To configure the options for displaying on-screen information. The following

display options are available:

• Subtitle Shift – To set the display position for subtitles. When the “Subtitle Shift” is set at 0

(default), subtitles are displayed at the original position as specified on the disc. When it is

set at a value between 1 and 5, subtitles are shifted up. When it is set at a value between

-1 and -5, subtitles are shifted down. This feature is helpful for customers using a 2.35:1

“Constant Image Height” video projection system. Subtitles can be shifted to the active

video area so they do not get cut off.

• OSD Position – To set the display position for the on-screen display (OSD). When the

“OSD Position” is set at 0, the OSD is shown at the top and bottom of the video screen.

When it is set at a value between 1 and 5, the OSD is shifted towards the center of the

video screen. Similar to the subtitle shift setting above, the “OSD Position” feature is helpful

for customers using a 2.35:1 “Constant Image Height” video projection system.

• OSD Mode – To select how long the on-screen display information, such as elapsed or

remaining time, stays on the TV screen. The available options are:

• Normal – On-screen display information stays on the TV screen until the user cancels it.

• Silent – On-screen display information shows on the TV screen for a few seconds and

then disappears. The front panel display still maintains the selected display information.

• Remaining – On-screen display information stays on the TV screen until the user

cancels it. By default displays remaining time instead of elapsed time.

• Angle Mark (on/off) – To turn on/off the display of an angle mark when a DVD or Blu-ray

Disc with multiple available angles is played. Keeping the angle mark off avoids distraction

from normal movie watching.

• PIP Mark (on/off) – To turn on/off the display of a Picture-in-Picture mark when a Blu-ray

Disc with secondary video is played. Keeping the PIP mark off avoids distraction from

normal movie watching.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 92 93

Comments to this Manuals

No comments

APC BDP-95 User Manual Page 61

Comments to this Manuals