APC BDP-95 User Manual Page 72

  • Download
  • Add to my manuals
  • Print
  • Page
    / 93
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 71
SETUP MENU OPTIONS
66
Multi-Channel Analog Audio to Receiver
If the player is connected to an A/V receiver through the 7.1ch or 5.1ch analog audio jacks using 8 or 6 RCA
cables (as described in “Method 5” on page 15), you can play all supported audio formats and listen to them
with your A/V receiver and
surround sound systems. The following audio format setup options are
recommended:
o Secondary Audio: Off (or On if you need secondary audio)
o HDMI Audio: Off
o SACD Output: PCM or DSD (depending on your listening preference)
o HDCD Decoding: On
o Coaxial Optical Output: (any – not in use)
o LPCM Rate Limit: (any – set to 192k may help to get the best analog
audio quality)
Also set Speaker Configuration in the “Audio Processing” menu:
Set Down Mix to “7.1Ch” or “5.1Ch.
Set the speaker size and subwoofer properly according to your actual audio hardware. (see
page 67)
Enable or select the multi-channel analog inputs on your receiver
Coaxial or Optical Digital
Audio to Receiver
If your audio connection is as described in “Method 6” on page 16 of this guide, and the A/V receiver supports
Dol
by Digital and DTS decoding, the following audio format setup options are recommended:
o Secondary Audio: Off (or On if you need secondary audio)
o HDMI Audio: Off
o SACD Output: (any – SACD is not available through the
optical/coaxial output)
o HDCD Decoding: On (or Off if the receiver can decode HDCD)
o Coaxial Optical Output: Bitstream
o LPCM Rate Limit: 48k (or higher if supported by the receiver)
Stereo Analog Audio to Receiver
If you prima
rily listen to stereo contents or your receiver only offers stereo audio connections, please use the
RCA-style cables to connect the dedicated STEREO AUDIO OUT, or use the XLR3 cables to connect the
BALANCED STEREO AUDIO OUT of the player to your receiver, as described in “Method 7 or 8” on page 17
to 18 of this guide. The following audio format options are recommended:
o Seconda
ry Audio: Off (or On if you need secondary audio)
o HDMI Audio: Off
o SACD Output: PCM or DSD (depending on your listening preference)
o HDCD Decoding: On
o Coaxial Optical Output: (any – not in use)
o LPCM Rate Limit: (any – set to 192k may help to get the best analog
audio quality)
Page view 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 92 93

Comments to this Manuals

No comments