Apc SYMMETRA 990 User Manual download pdf (Page 21)

Configuration: How to Configure the System

Symmetra MW with External Bypass Static Switch Operation Manual - 990-1377D-001 17



Configure the Network Settings screen:

– Enable network: Use this checkbox to connect

or disconnect the UPS from the network.

– IP Settings

• IP address: The static IP address.

• Subnet mask: The subnet mask for the

network segment containing the UPS.

• Gateway: The network gateway for the

segment containing the UPS.

– DNS Settings

• Primary DNS server: The IP address of the DNS server to be used by the UPS (optional).

• Secondary DNS server: The IP address of a backup DNS server if the primary server is not

available (optional).

– Host Name Settings

• Host name: The network host name for the system. This uniquely identifies the system on the

network. Standard letters (a-z and A-Z), digits (1-9), and hyphen (-) can be used.

• Domain name: The DNS network domain containing the UPS. Standard letters (a-z and A-Z),

digits (1-9), and hyphen (-) can be used.

– SMTP Settings

• From address: The source address used when sending e-mails.

• SMTP server: The SMTP server responsible for sending e-mails.

–Press Apply Changes to complete the changes and select arrow down to go to the next Network

Configuration screen.

Note: The display will have to be rebooted in order for the changes to the domain name or

DNS servers to take effect.



Configure the E-mail Settings screen:

– Enable E-mail: Select to enable the e-mail

notifications.

– To add a new e-mail recipient, touch the Add

New button, type in the e-mail address and

specify the minimum severity of alarm. All

entries will appear in red until Apply Changes

is pressed.

– To edit or delete an e-mail recipient, select the

recipient from the recipient list, and then

choose to either update or delete it.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

No comments

Apc SYMMETRA 990 User Manual Page 21