Apc SYMMETRA 990 User Manual download pdf (Page 22)

Configuration: How to Configure the System

18 Symmetra MW with External Bypass Static Switch Operation Manual - 990-1377D-001

– Apply Changes: Press this button after all changes have been made. Entries will appear in red

until this button is touched.

– Send Test E-mail: Pressing this button sends a test e-mail to all configured e-mail recipients. This

button can be used to validate the e-mail settings.

– Press arrow down to go to the next Network Configuration screen.



Configure the SNMP Settings screen. The UPS

can be set to send SNMP traps if UPS alarm

conditions occur, and when the conditions return

to normal afterwards. Each trap contains a

description of the alarm condition. Up to 10 trap

receivers can be entered. The trap receiver must

have the APC PowerNet MIB (version 3.6.1 or

later). The latest version of the PowerNet MIB

can be downloaded from www.apc.com.

– Enable SNMP: Enable the SNMP functionality

by selecting this checkbox.

– To add a new trap receiver, press the Add New button, type in the address and specify the

minimum severity of alarm. All entries will appear in red until Apply Changes is pressed.

– To edit or delete a trap receiver, select the recipient from the recipient list, and then choose to

either update or delete them.

– Apply Changes: Press this button after all changes have been made. Entries will appear in red

until this button has been pressed.

– Send Test SNMP: Pressing this button sends a test trap to all configured trap receivers. This

button can be used to validate SNMP settings.

– Press arrow down to go to the next Network Configuration screen.



Configure the Remote Monitoring Service

Settings screen. The APC Remote Monitoring

Service (RMS) is an APC professional service

which securely monitors the customer’s Network-

Critical Physical Infrastructure (NCPI) from a

remote 24x7 operation center, responding to

events according to a pre-defined customer

escalation procedure. Go to http://rms.apc.com to

learn more about this service.

The APC Remote Monitoring Service uses the

HTTP protocol to post information to its

database. If a proxy server is used for Internet connection, then the required proxy server port

settings must be specified (a proxy server acts as an agent between a workstation user or other

networked device and the Internet to regulate security, administrative control and caching).

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comments to this Manuals

No comments

Apc SYMMETRA 990 User Manual Page 22

Comments to this Manuals

Related products and manuals for Computer Accessories Apc SYMMETRA 990