APC AR2901 Specifications download pdf (Page 12)

DC diskontcomputer.com GmbH

Traunuferstrasse 110

4052 Ansfelden, Austria

:: Seite 12 von 35 :: Datenblatt zum Produkt APC APC NetShelter VL 42U 600mm Wide x 1070mm no Sides Black mit DC# 473794 ::

Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail ([email protected]) gerne weiter!

Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=473794

NetShelter VL Enclosure—Unpacking, Installation, and Customization 8

Installation

Installing the Enclosure

Leveling the enclosure

Level the enclosure before installing equipment.

The leveling feet at the corners provide a stable base if the floor is uneven, but they cannot compensate

for a badly sloped surface. You can remove the casters (not provided) and leveling feet to allow the base

of the enclosure to rest directly on the floor.

1. Move the enclosure to a level location.

2. For each leveling foot, insert a Phillips or

slotted screwdriver (not provided) into the

screw above the leveling foot. Turn the

screw clockwise to extend the leveling foot

until it makes firm contact with the floor.

Note: If the enclosure needs to be leveled after equipment has been installed, use a 13-mm

open-ended wrench (not provided) to lower the leveling feet. For each leveling foot, fit the

13-mm end of the open-ended wrench to the hex head just above the round pad on the bottom

of the foot. Turn the wrench clockwise to extend the leveling foot until it makes firm contact

with the floor.

APC offers the following options for leveling the enclosure.

Product SKU Description Figure

Caster kit AR7719

Attaches externally to the

enclosure to provide

additional stability and

mobility.

ns1468a

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 34 35

No comments

APC AR2901 Specifications Page 12